Kia 2015 soul Owner's Manual page 500

Maintenance
Front side marker
Follow the steps 1 to 5 from the pre-
vious page.
6.Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
7.Pull the bulb out of the socket.
8.Insert a new bulb into the socket.
9.Install the socket into the assembly
by aligning the tabs on the socket
with the slots on the assembly and
turning the socket clockwise.
7 80
Front fog lamp bulbs
(if equipped)
OPS073025
1. Remove the front bumper under
cover.
2. Reach your hand into the back of
the front bumper.
3. Disconnect the power connector
from the socket.
4. Remove the bulb-socket from the
housing by turning the socket
counter clockwise until the tabs on
the socket align with the slots on
the housing.
5. Install the new bulb-socket into the
housing by aligning the tabs on
the socket with the slots in the
housing. Push the socket into the
housing and turn the socket clock-
wise.
OPS073028
6. Connect the power connector to
the socket.
7. Reinstall the front bumper under
cover.
✽ ✽ NOTICE
If the headlight aiming adjustment
is necessary after the headlight
assembly is reinstalled, consult an
OPS073027
authorized Kia dealer.