Sony HVR-S270E Operating Manual page 57

b Notes
• Your camcorder automatically goes into a stopped state when it is in pause for more than 3 minutes.
• The screen may temporarily go blank losing images and sound when signals switch between HDV
and DVCAM (DV) during playback of a tape in which HDV format and DVCAM (DV) format are
mixed.
• You cannot play back movies recorded in HDV format on DVCAM (DV) format video cameras or
mini DV players.
• You can play back a DV format tape on your camcorder only when its contents are recorded in the SP
mode. You cannot play back movies recorded on the DV format tape in the LP mode.
• Time code and user bits will not be displayed correctly when you play back a tape with no time code
or user bit data, or a tape with time code that your camcorder does not support.
z Tips
• See page 130 for indicators displayed on the screen during playback.
• See page 59 for how to switch displays during playback.
To search for a scene while viewing a movie
Press / during playback (Picture Search). To view during fast forward, press and hold
M. To view during rewind, press and hold m (Skip Scan).
To adjust the volume
Adjust the volume with the MONITOR dial.
To view still images
1 Set the POWER switch to ON and the CAMERA/VCR switch to VCR.
2 Press the MEMORY/PLAY button.
3 Select a still image that your want to view using the MEMORY -/+ button.
To stop viewing still images, press the MEMORY/PLAY button again.
To display the list of still images (index screen)
1 Set the POWER switch to ON and the CAMERA/VCR switch to VCR.
2 Press the MEMORY/INDEX button.
101–0050
1 / 19
101
3 Select a still image using the MEMORY -/+ button.
To display a single image, move B to that image and press the MEMORY/PLAY button.
To stop displaying the list of still images, press the MEMORY/INDEX button again.
57
Continued ,