Bluetooth (Infotainment Controls - Base Radio); Controls - Base Radio With - GMC Sierra Instruction Manual

: Press to end a call, reject a
call, or cancel an operation. Press
to mute or unmute the infotainment
system.
Infotainment System Controls
For information about how to
navigate the menu system using the
infotainment controls, see Overview
(Base Radio) 0 184 or Overview
(Base Radio with Touchscreen)
0 187.
MENU : Turn to scroll through a list.
Press to select the highlighted list
option.
: Press to go to the Home Page.
See Home Page (Base Radio)
0 188 or Home Page (Base Radio
with Touchscreen) 0 190.
#
PHONE or : Select to enter the
phone main menu. See Bluetooth
(Voice Recognition - Base Radio)
0 221 or Bluetooth (Infotainment
Controls - Base Radio) 0 217 or
Bluetooth (Overview) 0 216 or
Bluetooth (Infotainment Controls -
Base Radio with Touchscreen)
0 226.
Voice Recognition
If equipped, the voice recognition
system uses commands to control
the system and dial phone numbers.
Noise : The system may not
recognize voice commands if there
is too much background noise, such
as noise from open windows or loud
talking inside the vehicle.
When to Speak : A tone sounds to
indicate that the system is ready for
a voice command. Wait for the tone
and then speak.
How to Speak : Speak clearly in a
calm and natural voice.
Audio System
When using the Bluetooth system,
sound comes through the vehicle's
front audio system speakers and
overrides the audio system. Use the
knob during a call to change the
volume level. The system maintains
a minimum volume level.
I n f o r ma t i o n P r o v i d e d b y :
Infotainment System
Bluetooth Audio Quality
Turn off the Echo and Noise
cancellation feature on your phone,
if supported, for the best hands-free
performance.
See www.gm.com/bluetooth.
Bluetooth (Infotainment
Controls - Base Radio)
For information about how to
navigate the menu system using the
infotainment controls, see Overview
(Base Radio) 0 184 or Overview
(Base Radio with Touchscreen)
0 187.
Switching to Handset or
Hands-Free Mode
To switch between handset mode
and hands-free mode, use the
OnStar command, transfer call.
Pairing
A Bluetooth-enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
your cell phone manufacturer's user
217