Meyer Sound Compact VariO UPJ-1P Datasheet

D ATASH EET
UPJ-1P : Compact VariO
The UPJ-1P combines the advantages of
self-powered systems with the place-
ment and arraying flexibility afforded by
a VariO™ rotatable horn. Though remark-
ably compact and lightweight, the UPJ-1P
produces a robust peak power output of
128 dB SPL at 1 meter, making it suitable for
use either singly as a primary loudspeaker
or in multi-cabinet horizontal or vertical
arrays. Applications include A/V presenta-
tions, small- to medium-sized main sound
reinforcement systems, fill, delay, effects,
under-balcony or under-canopy coverage
and distributed systems.
The UPJ-1P was bred for flexibility: wheth-
er oriented vertically or horizontally, it can
provide narrow, targeted coverage or wide
coverage, with a simple turn of the VariO
rotatable horn, changing its 80° x 50° cov-
erage pattern between the horizontal and
vertical planes. In size and weight, the UPJ-
1P fits into the UltraSeries between the UPM
and UPA. With a 10-inch low-frequency
features & benefits
Exceptional fidelity and extended high
frequency performance
Surprising power capability in a compact
package
Extraordinarily flat amplitude and phase
response for tonal accuracy and precise
imaging
Loudspeaker
™
22.43
[570 mm]
11.15
[283 mm]
Protective Grille
neodymium magnet cone driver and a 0.75-
inch exit, 3-inch diaphragm compression
driver in the high-frequency section, the
UPJ-1P delivers uncompromising quality
and coverage.
Sophisticated amplification and protection
circuitry produces consistent and predict-
able results in any system design. A propri-
etary Meyer Sound two-channel, class AB/
bridged power amplifier with complemen-
tary MOSFET output stages provides a total
output of 300 watts. The incoming audio
signal is processed through an electronic
crossover and correction filters for flat
phase and frequency response, as well as
for driver protection. Each channel has peak
and rms limiters that prevent driver over-
excursion and regulate voice coil tempera-
ture. Limiter activity is easy to monitor with
the limit LEDs on the rear panel.
The modular, field-replaceable amplifi-
er/processing package also incorporates
Constant-Q horn affords uniform response
throughout the coverage area
Predictable array performance ensures
system design flexibility
VariO horn allows loudspeakers to be
oriented horizontally or vertically
6.85
[174 mm]
Dimensions
11.15" w x 22.43" h x 12.25" d
(283 mm x 570 mm x 311 mm)
Weight
46 lbs (20.87 kg)
Enclosure Premium birch plywood
Finish Black textured
Powder-coated hex-stamped steel, black mesh screen
Rigging Aluminum end plates for mounting/flying cabinets
with QuickFly and standard rigging options; metric
®
M8 threaded points are used in all UPJ-1P rigging
hardware
Meyer Sound's Intelligent AC™ power sup-
ply, which automatically adjusts for any
line voltage worldwide and provides both
soft turn-on and transient protection. The
UPJ-1P is compatible with the RMS™ remote
monitoring system, which offers compre-
hensive monitoring of system parameters
on a Windows
The UPJ-1P's end plates are made of heavy
duty, high-strength, corrosion-resistant
6061-T6 aluminum. Strategically placed
metric M8 threaded points allow simple
mounting using eyebolts or directly to
third-party pole assemblies. QuickFly rig-
ging options including the MAA-UPJ array
adapter (also made from 6061-T6 alumi-
num), MLB-UPJ L-brackets and MYA-UPJ
mounting yoke assembly provide unprec-
edented mounting, flying and arraying flex-
ibility. Options include weather protection,
custom color finishes, and cabinets with
no handles for fixed applications requiring
specific cosmetics.
applications
Portable and installed audio-visual systems
Theatrical sound reinforcement
Frontfill and under balcony
Conference centers, presentations, ballrooms
and houses of worship
UL TRA SERIES
7.49
[190 mm]
12.25
[311 mm]
6.85
[174 mm]
11.15
[283 mm]
11.15
[283 mm]
-based network.
®