Call Settings - Nokia 2330 User Manual

S e t t i n g s
To define the settings for connections from your PC, select Menu > Settings >
Connectivity > Packet data > Packet data settings > Active access point, and
activate the access point you want to use. Select Edit active access point > Packet
data access point, enter a name to change the access point settings, and select OK.
Select Packet data access point, enter the access point name (APN) to establish a
connection to an network, and select OK.
You can also set the EGPRS dial-up service settings (access point name) on your PC
using the Nokia Modem Options software. See "Nokia PC Suite" on page 43. If you
have set the settings both on your PC and on your device, the PC settings are used.

■ Call settings

Select Menu > Settings > Call and from the following:
Call forwarding — Forward your incoming calls (network service). You may not be
able to forward your calls if some call restriction functions are active. See Call
restrictions in "Security" on page 42.
Anykey answer — Answer an incoming call by briefly pressing any key, except the
power key, the camera key, the left and right selection keys
Automatic redial — Make a maximum of 10 attempts to connect the call after an
unsuccessful call attempt
1-touch dialing — Dial the names and phone numbers assigned to the speed-
dialing keys 2 - 9. To use, press and hold the corresponding number key
Call waiting — Display a notification for an incoming call while you have a call in
progress (network service).
Call duration display — Display a counter during each call.
Summary after call — Display the approximate duration and cost (network service)
of the call after each call.
39