Section 4 - Configuration
Under Share Folder vvol, enter a name you want the Virtual
Volume to be called. This is the Virtual Volume you will use to
connect to the Target. Remember, no spaced between words
allowed.
Setup Authentication if you wish. If you have already setup
CHAP on your Target, you will need to authenticate the Target
with the same password you used with CHAP.
If you click No, the User Name and Password is greyed out.
If you click Yes, the fields are open and you can enter your
information per your CHAP settings.
Click Save to save the settings.
D-Link ShareCenter DNS-345 User Manual
124