ViewSonic CDP4260-L User Manual page 27

You can select:
• The time for the display to turn on and turn off.
• The days in a week for the display to activate.
• Which input source the display will use for each
scheduled activation period.
NOTE: You should set up current date and time in
{DATE AND TIME} menu before using this
function.
1. Press [SET] button to enter the submenu.
SCHEDULE
TODAY 2011 . 08 . 04
1
2 ON
3 ＿ : ＿
4
5 EVERY DAY
6 WED
7 SAT
EXIT
+-:SEL :RETURN
2. Press [ ] or [ ] button to select a schedule
item (item number 1 ~ 7), and then press [SET]
button to mark it the item number.
SCHEDULE
TODAY 2011 . 08 . 04
1
1
2 ON
3 ＿ : ＿
4
5 EVERY DAY
6 WED
7 SAT
+-:SEL EXIT :RETURN
3. Press [ ] or [ ] button to select the schedule:
POWER-ON schedule: Press [ ] or [ ]
1
button to set the hour and minute for the
display to turn on.
POWER-OFF schedule: Press [ ] or [ ]
2
button to set the hour and minute for the
display to turn off.
Select or leave an empty "__" for both the hour
and minute slot if you do not want to use this
power-on or power-off schedule.
INPUT-SOURCE selection: Press [ ] or
3
[ ] button to select an input source. If no
input source is selected, the input source
will remain the same as last selected.
DATE schedule: Press [ ] button to select
4
which day in a week this schedule item will
be take effect, and then press the [SET]
button.
THU 20 : 19 : 55
OFF INPUT
＿ : ＿ ＿
MON TUE
THU FRI
SUN EVERY WEEK
MENU
:EXIT MENU
THU 20 : 19 : 55
2 3
OFF INPUT
＿ : ＿ ＿
4
MON TUE
THU FRI
SUN EVERY WEEK
MENU :EXIT MENU
4. For more schedule settings, press [EXIT] button
and then repeat the steps above. A check mark
in the box next to the number of the schedule
item indicates that the selected schedule is in
effect.
NOTES:
• The {EVERY DAY} selection in a schedule item
takes priority over the other weekly schedules.
• If the schedule overlap, the scheduled power-
on time takes priority over scheduled power-off
time.
• If there are two schedule items programmed for
the same time, the highest numbered schedule
takes priority. For example, if schedule items #1
and #2 both set the display to power on at 7:00
AM and off at 5:00 PM, then only schedule item
# 1 will take effect.
DATE AND TIME
Adjust the current date and time for the display's
internal clock.
DATE AND TIME
YEAR
MONTH
DAY
HOUR
MINUTE
DAYLIGHT SAVING TIME
CURRENT DATE TIME
:SEL +-:ADJ
1. Press [SET] button to enter the submenu.
2. Press [ ] or [ ] button to toggle among the
{YEAR}, {MONTH}, {DAY}, {HOUR}, {MINUTE},
and {DAYLIGHT SAVING TIME} settings.
3. Press [ ] or [ ] button to adjust all settings
except {DAYLIGHT SAVING TIME}.
CONFIGURATION1 RESET
Reset all settings in the CONFIGURATION1 menu
to factory preset values.
19
2011
08
04
20
20
OFF
2011 . 08 . 04 00 : 18 : 10
EXIT :RETURN MENU :EXIT MENU