Hot Water Connection; Recycled Water Connection; Hot Water Supply - Miele PW 6080 VARIO Operating And Installation Instructions

Installation

Hot water connection

To keep electricity consumption costs
down this machine can be connected
to a (ring) piped hot water supply. It is
not economical to run it from an
individual hot water supply if it is not in
continuous use, as the water in the
supply pipes cools down and more
energy would be required to reheat the
water. For hot water connection the
same conditions apply as for cold water
connection.
The inlet hose with the red stripes (hot
water hose) is connected to the
stopcock.
For operational reasons the machine
must not be connected to hot water
only.
If the machine is not installed for hot
water connection, the Main wash water
setting must be set accordingly and the
hot water inlet hose must be detached:
^ Go to Settings menu/Supervisor level/
Main wash water and select the Cold
option.
54
The programme durations may be
longer.
^ Unscrew the inlet hose (hot water -
red stripes)
^ Plug the inlet connection with the cap
supplied.

Recycled water connection

This machine can be connected to a
recycled water supply.
^ Unscrew the blanking cap from the
recycled water valve.
^ Connect the additional inlet hose to
this valve.
The main wash and rinses water
settings must then be set as
appropriate.
^ Go to Settings menu/Supervisor level
menu and select the Recycled water
option.

Hot water supply

It is possible to connect the machine to
a hot water supply, 70°C to a maximum
of 85°C. A special inlet hose is required
for this option. The machine must also
be reprogrammed by a Miele service
technician or Miele authorised service
dealer.