Grounding Instructions; Adapter Plugs - GE JES1140 Owner's Manual

GROUNDING INSTRUCTIONS

WARNING
This appliance must be grounded. In the event of an
electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire
for the electric current.
This appliance is equipped with a power cord having
a grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly
installed and grounded.
Consult a qualified electrician or service technician if
the GROUNDING INSTRUCTIONS are not completely
appliance is properly grounded.

ADAPTER PLUGS

Usage situations where appliance's power cord will be disconnected infrequently.
Because of potential safety hazards under certain conditions,
we strongly recommend against the use of an adapter plug.
However, if you still elect to use an adapter, where local codes
permit, a TEMPORARY CONNECTION may be made to a properly
grounded wall receptacle by the use of a UL listed adapter
which is available at most local hardware stores.
The larger slot in the adapter must be aligned with the larger slot in
the wall receptacle to provide proper polarity in the connection of
the power cord.
CAUTION: Attaching the adapter ground terminal to the wall receptacle cover screw does not ground
the appliance unless the cover screw is metal, and not insulated, and the wall receptacle is grounded
through the house wiring.
You should have the circuit checked by a qualified electrician to make sure the receptacle is properly grounded.
When disconnecting the power cord from the adapter, always hold the adapter with one hand. If this
is not done, the adapter ground terminal is very likely to break with repeated use. Should this happen,
DO NOT USE the appliance until a proper ground has again been established.
Usage situations where appliance's power cord will be disconnected frequently.
Do not use an adapter plug in these situations because frequent disconnection of the power cord places
undue strain on the adapter and leads to eventual failure of the adapter ground terminal. You should
have the 2-prong wall receptacle replaced with a 3-prong (grounding) receptacle by a qualified electrician
before using the appliance.
If the outlet is a standard 2-prong wall outlet,
it is your personal responsibility and obligation
to have it replaced with a properly grounded
3-prong wall outlet.
Do not under any circumstances cut or remove
the third (ground) prong from the power cord.
this appliance. If the power cord is too
short, have a qualified electrician or service technician
install an outlet near the appliance.
(See EXTENSION CORDS section.)
For best operation, plug this appliance into its
own electrical outlet to prevent flickering of lights,
blowing of fuse or tripping of circuit breaker.
(Adapter plugs not
permitted in Canada)
Align large
prongs/slots
TEMPORARY
METHOD
GEAppliances.com
Ensure proper ground
and firm connection
before use.
5