Toshiba 32L5400 Series Owner's Manual page 26

Using the Auto Format
When the TV receives a true HDMI signal picture
and the Auto Format is On, it will automatically be
displayed in HDMI signal format, irrespective of the
TV's previous setting.
1
From the Display Settings in the
PREFERENCES menu, press  or  to select
Auto Format.
Display Settings
Auto Format
4:3 Stretch
PC Settings
2
Press  or  to select On or Off .
Activating the 4:3 Stretch
When 4:3 stretch is activated, this function will
switch 4:3 format programmes into a full screen
picture.
1
From the Display Settings menu, press  or 
to select 4:3 Stretch.
2
Press  or  to select On or Off .
NOTE:
This feature is not available when Auto Format is set
to Off .
Activating Blue Screen
When Blue Screen is set to On, the screen will turn
blue and the sound will be muted when no signal is
received.
1
From the PREFERENCES menu, press  or  to
until Blue Screen is selected.
2
Press  or  to select On or Off .
NOTE:
Some external inputs may not mute the sound.
Eco Mode
In Eco Mode, the screen becomes slightly darker and
you will be able to reduce power consumption.
NOTE:
The Backlight adjustment is not available in Eco
Mode.
1
From the PREFERENCES menu, press  or 
until Energy Saving Settings is selected, and
then press OK.
2
Press  or  to select Eco Mode and press 
or  to select On or Off .
26
32404755L5400Series_En.indd 26 32404755L5400Series_En.indd 26
Using the TV's features
Setting No Signal Power Down
The TV will automatically turn itself off after 15
minutes when no signal is detected. You can change
the setting to Off for the following purposes:
• Low signal strength of analog channel (no signal
detection).
• Only Audio L/R is connected to an external
input in order to listen to music through the TV
speakers.
1
From the PREFERENCES menu, press  or 
until Energy Saving Settings is selected, and
Off
then press OK.
Off
2
Press OK.
3
Press  or  to select the item you want to
change and press  or  to select On or Off .
NOTE:
• Default setting is all On.
• A warning message will appear 1 minute before
turning off .
Setting the Power Saving Indicator
You can display the current power saving status.
1
From the PREFERENCES menu, press  or 
until Energy Saving Settings is selected, and
then press OK.
2
Press  or  to select Power Saving Indicator
and press  or  to select On or Off .
Press
On to display the Saving Level.
• The longer the Saving Level display bar is, the
• The saving level is also displayed when the
when the Power Saving Indicator is
higher the power save eff ect is.
Picture Mode or Backlight settings are
changed.
2014/07/24 17:06:26 2014/07/24 17:06:26