Sega 952 User Manual
Sega 952 User Manual

Sega 952 User Manual

Electronic chair scale

Advertisement

Quick Links

seca 952

Advertisement

Table of Contents
loading

Summary of Contents for Sega 952

  • Page 1 952...
  • Page 2 Before using the new scale, please take a little time to read the following safety instruc- tions. Warnings Notes • Never use the seca 952 chair scale for • Follow the safety instructions in the in- transport purposes. Do not use struction manual.
  • Page 3: Power Supply

    Once battery voltage is no longer adequate, the battery symbol first appears in the display to indicate that battery power is dropping. bAtt Once battery power is no longer sufficient, appears in the display and weighing is no longer possible. Model 952...
  • Page 4: Operation

    4. Operation Controls and displays Controls on the display 0. 0 Switch scale on and off s switch between kg, lbs and sts press briefly s start a new weighing operation without removing the press briefly load from the scale s set display to zero, activate/deactivate tare function hold down Other controls...
  • Page 5: Correct Weighing

    – Read the weighing result off the digital display. – If a load greater than 200 kg is placed stop StoP on the scale, appears in the dis- play. – To switch off the scale, press the start key again. Model 952...
  • Page 6: Auto-Hold Function

    Auto-hold function The HOLD function is activated automatically at weights of over 1.5 kg. The display flash- es until a stable weight has been measured. The display is then frozen until the next weighing operation. HOLD appears in the display. –...
  • Page 7 – Maximum load has been exceeded. … the display flashes? – If you have just activated the Hold or Tare function, please wait until the scale has de- tected a steady weight value. The display will then stop flashing. Model 952...
  • Page 8: Technical Data

    – If there has been no activation of a function beforehand, remove the load from the scale 0. 0 and wait until is displayed, then weigh again. Er:12 … the display and a number appear (e.g. – Switch off the scale with the Start key and start the scale again. The scale will then work normally again.
  • Page 9: Disposing Of The Device

    We would ask our customers abroad to located anywhere other than the custom- contact their local sales agent in the event er’s premises. In the event of transport of a warranty matter. damage, claims under warranty can be Model 952...

Table of Contents