Selecting Pc Screen Size Input Signal - Zenith LXG-135 Manual

Selecting PC Screen Size Input Signal

When using the PC input mode, before turning on the PC, select the appropriate screen size in the
SPECIAL menu. This will enable the image size of the PC in DOS mode to fit on the projection screen.
For other screen size signals except 640X400 70Hz and 720X400 70Hz, the projected image sizes are
adjusted automatically.
1
Press the MENU button and
shown below.
2
Press the ENTER button and move the right to select the screen size you want to use.
option.
3
Move the left or
POINTER
a. Selecting 720X400
: If the input signals are 720X400 70Hz or 640X400 70Hz , the projected image size will always be
adjusted to the 720X400 70Hz format.
b. Selecting 640X400
: If the input signals are 720X400 70Hz or 640X400 70Hz , the projected image size will always be
adjusted to the 640X400 70Hz format.
To remove the menu display, press the MENU button repeatedly.
select the SPECIAL menu as 35
POINTER up or down to
exit move enter
Menu
G VIDEO
G POSITION
G SPECIAL
G TRACKING
POINTER button up or down to select the VGA Text
exit move select
Menu
G VIDEO
G POSITION
SPECIAL
E
Language
Flip Horizontal
Flip Vertical
Blank Image
Lamp Time
VGA Text 720X400 G
G TRACKING