Loading The Schema In The Ldap Server; Defining User Permissions - Cisco PIX 500 Series Configuration Manual

Appendix E Configuring an External Server for Authorization and Authentication
mayContain: Simultaneous-Logins
mayContain: Primary-DNS
...
mayContain: Confidence-Interval
mayContain: Cisco-LEAP-Bypass
distinguishedName:
CN=User-Authorization,CN=Schema,CN=Configuration,OU=People,DC=ExampleCorporation,DC=com
objectCategory:
CN=Class-Schema,CN=Schema,CN=Configuration,OU=People,DC=ExampleCorporation,DC=com
objectClass: classSchema
objectClassCategory: 1
possSuperiors: organizationalUnit
name: User-Authorization
rDNAttID: cn
showInAdvancedViewOnly: TRUE
subClassOf: top
systemOnly: FALSE
DN:
changetype: modify
add: schemaUpdateNow
schemaUpdateNow: 1
-
systemOnly: FALSE
DN:
changetype: modify
add: schemaUpdateNow
schemaUpdateNow: 1
-

Loading the Schema in the LDAP Server

The directions in this section are specific to the Microsoft Active Directory LDAP server. If you have a
Note
different type of server, see your server documentation for information on loading a schema.
To load the schema on the LDAP server, enter the following command from the directory where the
schema file resides:
For example:
ldifde -i -f 3k_schema.ldif

Defining User Permissions

The directions in this section are specific to the Microsoft Active Directory LDAP server. If you have a
Note
different type of server, see your server documentation to define and load user attributes.
OL-12172-03
Schema Name
ldifde -i -f
Cisco Security Appliance Command Line Configuration Guide
Configuring an External LDAP Server
E-17