Code List For Standby Cause - Sharp LC-32D44U Service Manual

7. Code list for Standby Cause

Code Indication
1 RC_STNBY
2 NO_OPERT
3 NO_SIGNA
4 PC_MODE1
5 PC_MODE2
6 SLEEP_TM
8 OFF_232C
9 AVC_TACT
A BSBOOKED
B E_MONIPW
10 E_CCKMVT
11 OUT_OF_R
12 E_NOMONI
14 E_AVCFAN
15 E_BSSUBM
16 E_CVICIC
17 E_AVCTMP
18 E_1BITAU
1A E_MONITR
1B E_FNLOCK
40 E_DSDEV
/* Standby set by remote control */
/* Off caused by no operation */
/* Off caused by no signal */
/* Set by the PC power management mode 1 */
/* Set by the PC power management mode 2 */
/* Set by off timer */
/* Set by the command from RS232C */
/* Set by the front switch at the AVC center */
/* The pre-set time has passed since TV was turned on from standby by the BS timer. */
/* Monitor main power failure detected */
/* Abnormal voltage of CCKM line detected */
"/* While a PC display is on, unspecified input continued long time. */"
/* Incompatible monitor is connected to the AVC center. */
/* Fan failure at the AVC center */
/* Communication failure with the BS sub microcomputer (Not used) */
/* CVIC failure */
/* Abnormal temperature at the AVC center */
/* 1Bit-AMP failure */
/* Monitor problem detected */
/* Fan lock for North America */
/* Failure in Digital Standby */
Description
5 – 12
LC-32D44U