10.1. (Troubleshooting) Oven stops operation during cooking
SYMPTOM
1. Oven stops
in
3 seconds
pressing [Start] button
Oven stops in 23 seconds after
pressing [Start] button
2. No display and no operation at all.
Fuse is blown.
CAUSE
after
No 120V AC is supplied to H.V.Inverter (U) CN702
terminals
H.V.Inverter (U) operates by the control signals
from DPC but magnetron is not oscillating
Most probably loose connection of connectors, or
door latch mechanism is not adjusted properly
1. Interlock Switch
2. Power relay RY1
3. Loose lead wire connector CN701, CN702
4. H.V. Inverter (U)
1. Magnetron
2. Loose lead wire connector CN703
3. H.V. Inverter (U)
1. Allign door, Door Interlock Switches
2. Loose wiring connectors
21
NN-SD372S
CORRECTIONS