Installing And Removing The Battery; To Remove The Battery - GreatCall Jitterbug5 User Manual

Installing And Removing The Battery

The battery has been pre-installed into your Jitterbug phone for your
convenience.

To Remove The Battery

1. If the phone is on, turn it off by opening your Jitterbug and holding down the
button until the GreatCall logo appears. The phone will then turn off.
on
off
2. With the back of the Jitterbug facing up, hold the phone with both hands so
that the GreatCall and Samsung logos are upside-
down.
3. Place both of your thumbs over the Samsung logo,
while squeezing the phone between your fingers and
thumbs, push the Battery Cover away from you.
4. To remove the battery, simply slide a fingernail in the
groove at the top of the battery, and gently pull the
battery out.
36 Getting Started