Controlling Data Usage - Sony Xperia M2 Aqua D2403 User Manual

To use your device as a Wi-Fi® hotspot
1
From your Home screen, tap
2 Find and tap Settings > More > Tethering & portable hotspot.
3 Tap Wi-Fi hotspot > Set up WI-Fi hotspot.
4 Enter the Network name (SSID) information.
5 To select a security type, tap the Security field. If required, enter a password.
6 Tap Save.
7 and drag the slider beside Wi-Fi hotspot to the right.
Tap
8 If prompted, tap OK to confirm.
Wi-Fi® hotspot is active.
9 To stop sharing your data connection via Wi-Fi®, drag the slider beside Wi-Fi
hotspot to the left.
To allow a WPS-supported device to use your mobile data connection
1
Make sure that your device is functioning as a portable Wi-Fi® hotspot.
2
From your Home screen, tap
3 Find and tap Settings > More > Tethering & portable hotspot > Wi-Fi hotspot.
4
Tap the on-off switch to activate Wi-Fi® hotspot.
5 Tap WPS connect.
6 To select a connection type, tap the WPS mode field.
7 Tap CONNECT, then follow the relevant instructions.
To rename or secure your portable hotspot
1
From the Home screen, tap
2 Find and tap Settings > More > Tethering & portable hotspot.
3 Tap Wi-Fi hotspot > Set up WI-Fi hotspot.
4 Enter the Network name (SSID) for the network.
5 To select a security type, tap the Security field.
6
If required, enter a password.
7 Tap Save.

Controlling data usage

Adjusting data usage settings can help you keep greater control over data usage but
cannot guarantee the prevention of additional charges.
To turn data traffic on or off
1
From your Home screen, tap
2 Find and tap Settings > Data usage.
3 Drag the slider beside Mobile data traffic to turn data traffic on or off.
When data traffic is turned off, your device can still establish Wi-Fi®, NFC and Bluetooth®
connections.
To Set a Data Usage Warning
1
Make sure cellular data traffic is turned on.
2
From your Home screen, tap
3 Find and tap Settings > Data usage.
4
To set the warning level, drag the warning line to the desired value. You receive
a warning notification when the amount of data traffic approaches the level you
set.
This is an Internet version of this publication. © Print only for private use.
.
appears in the status bar once the portable
.
.
.
.
34