Other Feature Settings; Headphone Level - Toshiba 32SL800A Owner's Manual

Audio Level Offset
DTV 2ch
ATV
External Input
Notes:
• The available item changes depending on the
current input source. For example, when watching
a DTV 2ch programme, only DTV 2ch is available
and the other two items are greyed out in the menu.
This allows you to easily adjust according to each
condition.
• When watching a DTV 5.1ch programme, this
feature is not available.
Headphone Settings
This setting is used to set the sound output when
headphones are connected�
Speaker Headphone
Link
On Sound is output
( 2 – + is available�)
Off Sound is output

(Headphone level

menu is available�)
1
From the Sound menu, press s or r to select
Headphone Settings and press OK�
2
Press s or r to select Speaker Link and press v
or w to select On or Off�
3
If you select Off, next select Headphone Level and
press v or w to adjust the headphone sound�
Headphone Settings
Speaker Link
Headphone Level

Other feature settings

Activating Blue Screen
With the Blue Screen function On, the screen will
automatically turn blue and the sound will be muted when
no signal is being received�
1
From the Preferences menu, press s or r until
Blue Screen is selected�
2
Press v or w to select On or Off�
Activating 4:3 Stretch
When 4:3 Stretch is activated, the size switching system
changes 4:3 programmes into full screen picture�
Using the TV's features (General)
-5
0
0
Speakers
No sound
Sound is output
( 2 – + is available�)
Off
50
1
From the Display Settings menu, press s or r to
select 4:3 Stretch�
2
Press v or w to select On or Off�
Panel Lock
Panel Lock disables the buttons on the TV� All buttons
on the remote control can still be used�
1
From the Preferences menu, press s or r to select
Panel Lock�
2
Press v or w to select On or Off�
Note:
When Panel Lock is On, a reminder will appear
when the buttons on the TV are pressed. If the
standby button is pressed, the TV will switch off and
can only be brought out of standby by using the
remote control.
Setting Automatic Power Down
The TV will automatically turn itself off (standby) after
approximately 4 hours, if you do not operate the control
buttons on the remote control or on the TV control panel�
1
From the Preferences menu, press s or r until
Energy Saving Settings is selected and press OK�
2
Press s or r to select Automatic Power Down,
press v or w to select On or Off and press EXIT�
Notes:
• This feature is set to On when Location is set to
Home.
• 1 minute before switching to standby, a warning
message will appear.
• The TV will automatically turn itself off after
approximately 1 hour if you do not operate the TV
(after turned on by On Timer).
Setting No Signal Power Down
The TV will automatically turn itself off after 15 minutes
when no signal is detected. You can change the setting to
Off for the following purposes:
• Low signal strength of analog channel (no signal
detection)
• Only Audio L/R is connected to an external input in
order to listen to music through the TV speakers�
1
From the Energy Saving Settings menu, press
OK�
2
Press s or r to select No Signal Power Down
and press OK�
29