Heated Windows And Mirrors; Heated Rear Window; Cabin Air Filter; Heated Exterior Mirrors - Ford 2015 FOCUS Owner's Manual

Side Window Defogging in Cold Weather
Vehicle with manual climate control
1 Select the windshield air vents using the
air distribution buttons.
2 Press the A/C button.
3 Adjust the temperature control to the
desired setting.
4 Adjust the fan speed to the highest
setting.
HEATED WINDOWS AND
MIRRORS

Heated Rear Window

Note: Make sure the engine is running
before operating the heated windows.
Press the button to clear the
heated rear window of thin ice
E72507
and fog. The heated rear
window will automatically turn off after a
short period of time. Start the engine
before you switch the heated rear window
on.
Do not use razor blades or other sharp
objects to clean or remove decals from
the inside of the heated rear window.
The vehicle warranty does not cover
damage caused to the heated rear
window grid lines.

Heated Exterior Mirrors

When you switch the heated
rear window on, the heated
E72507
exterior mirrors will
automatically turn on.
Focus (CDH) Canada/United States of America, enUSA
Climate Control
Vehicle with automatic climate control
Press the defrost button.
Adjust the temperature control to the
desired setting. Use 72°F (22°C) as a
starting point, then adjust the setting as
necessary.
Note: Do not remove ice from the mirrors
with a scraper or adjust the mirror glass
when it is frozen in place.
Note: Do not clean the mirror housing or
glass with harsh abrasives, fuel or other
petroleum-based cleaning products.

CABIN AIR FILTER

Your vehicle is equipped with a cabin air
filter, which gives you and your passengers
the following benefits:
• It improves your driving comfort by
reducing particle concentration.
• It improves the interior compartment
cleanliness.
• It protects the climate control
components from particle deposits.
You can locate the cabin air filter behind
the glove box.
Note: Make sure you have a cabin air filter
installed at all times. This prevents foreign
objects from entering the system. Running
the system without a filter in place could
result in degradation or damage to the
system.
114