Table of Contents
Advertisement
Time of arrival
The estimated time of arrival is
displayed if a destination is en‐
tered in the navigation system
before the trip is started.
The time must be correctly set.
Speed limit detection
Description of the speed limit detection, refer
to page 88, function.
Trip computer
The vehicle features two types of board com‐
puters.
▷
"Onboard info": the values can be reset as
often as necessary.
▷
"Trip computer": the values provide an
overview of the current trip.
Resetting the trip computer
On the Control Display:
1.
"Vehicle info"
2.
"Trip computer"
3.
"Reset": all values are reset.
"Automatically reset": all values are reset
approx. 4 hours after the vehicle came to a
standstill.
Display on the Control Display
Display the computer or trip computer on the
Control Display.
1.
"Vehicle info"
2.
"Onboard info" or "Trip computer"
Resetting the fuel consumption or
speed
On the Control Display:
1.
"Vehicle info"
2.
"Onboard info"
Online Edition for Part no. 01 40 2 954 258 - II/15
Displays
3.
"Consumpt." or "Speed"
4.
"Yes"
Sport displays
The concept
On the Control Display, the current values for
performance and torque can be displayed if
the vehicle is appropriately equipped.
Displaying sport displays on the
Control Display
1.
"Vehicle info"
2.
"Sport displays"
Speed warning
The concept
Displays a speed, when reached, should cause
a warning to be issued.
The warning is repeated if the vehicle speed
drops below the set speed once by at least
3 mph/5 km/h.
Displaying, setting or changing the
speed warning
On the Control Display:
1.
"Settings"
2.
"Speed"
3.
"Warning at:"
4.
Turn the controller until the desired speed
is displayed.
5.
Press the controller.
Speed warning is stored.
Controls
91
Advertisement
Table of Contents
