ZyXEL Communications ZyWALL USG Series Application Note page 93

1.6.1 Setting Up the WAN IPv6 Interface
In the CONFIGURATION > Network > Interface > Ethernet screen's IPv6 Configuration
1
section, double-click the wan1.
The Edit Ethernet screen appears. Select Enable Interface and Enable IPv6. Select Enable
2
Auto-Configuration. Click OK.
Note: Your ISP or uplink router should enable router advertisement.
1.6.2 Setting Up the LAN Interface
In the CONFIGURATION > Network > Interface > Ethernet screen, double-click the lan1 in
1
the IPv6 Configuration section.
The Edit Ethernet screen appears. Select Enable Interface and Enable IPv6.
2
Select Enable Router Advertisement and click Add and configure a network prefix for the LAN1
(2006:1111:1111:1111::/64 in this example). Click OK.
93