Meridian 555 User Manual page 14

To connect to a conventional
preamplifier
Connect the sockets marked INPUT on the rear panel of the
stereo power amplifier to the outputs from your preamplifier.
You should either use a twin-screened audio cable, or a pair of
single-screened audio cables. These cables can have a
considerable effect on the quality of the sound, and you are
advised to seek your dealer's advice on the best type of cables
for your system.
To connect to a 501 Control Unit
501 Control Unit
OUTPUT
Connect the sockets marked OUTPUT L and R on the rear
panel of the 501 Control Unit to the INPUT sockets on the rear
panel of the 555 Stereo Amplifier.
10
555 Stereo Power Amplifier
INPUT INPUT
Audio lead
To connect to A2 Loudspeakers
A2 Loudspeaker
555 Stereo Power Amplifier
Use the links provided to bridge the BASS/MID and TWEETER
terminals on the rear of each loudspeaker.
Connect one of each pair of the red and black terminals on
the rear panel of the 555 Stereo Power Amplifier to the red
and black terminals on the A2 Loudspeakers.
A2 Loudspeaker