Heated Seats, Heated And - Cadillac deville 2004 Personalization Manual

Three-Button Memory Systems
If your vehicle is equipped with the
three button memory system, follow
these procedures to set the memory:
With the vehicle in Park (P) adjust the
driver's seat including lumbar support
and recliner, outside rearview mirror
positions, climate control and audio
settings and (if equipped) power
tilt/telescoping steering wheel
position.
1. Press and hold Memory button 1
or 2 until two beeps sound. Again
look at your RKE transmitter to
determine which Memory button
you need to set.
Set EXIT Position
1. Recall driver position by briefly
pressing the appropriate Memory
button or RKE unlock button.
2. Adjust driver seat and power
tilt/telescoping steering wheel (if
equipped) to the desired exit
position.
3. Press and hold the EXIT button
until two beeps sound.
Refer to your Owner Manual for further information.
Driver
Information
These settings can be restored by
pressing the Memory 1 or 2 button
on the driver's door (shown above),
or by using the Remote Keyless Entry
(RKE) transmitter. The vehicle
memory settings will correspond to
the number on the RKE: 1 or 2.
Heated Seats
Heated and Cooled Seats
(if equipped)
Your vehicle may have heated or
heated and cooled seats. The
buttons are located on the driver and
front passenger door armrests.
The button with the heat lines
through just the seatback turns on
the heated seatback.
The button with heat lines through
both the seatback and seat cushion
turns on the heated seatback and
seat cushion.
The button with the snow flake above
the seat turns on the cooled seatback
and seat cushion.
There are three temperature settings
for each of the features above.
Audio Systems
Comfort/
Convenience
A light bar on the controls will
display which setting the feature is
in: high, medium or low. The
longest bar shows the high range
and the shortest bar shows the low
range.
When you press a button, the feature
will turn on the highest setting. Each
time you press the button, the
feature will go down one
temperature setting.
To turn the feature off, keep pressing
the button until the display lights
turn off.
Reviewed with Customer (Please Check Box)
Personalization
Guide
Maintenance/
Owner Privileges