Connecting Outputs - Meridian 562V.2 User Manual

Connecting outputs

To connect to a 568 Digital Surround
Processor
562V Multimedia Controller
MAIN
DIGITAL OUTPUT ANALOGUE
MAIN
Connect the MAIN digital output of the 562V to the CD/D1
digital input socket of the 568, using high-quality 75
screened cable.
Connect the MAIN analogue output of the 562V to the TV/A1
analogue input socket of the 568, using screened audio cable.
This takes advantage of the high-quality 24-bit analogue-to-
digital converter in the 568 to perform the conversion of
analogue sources.
Route the video through the 568 to take advantage of the
on-screen display.
Configure the 562V to Type 1; see Choosing standard
settings, page 28.
22
568 Digital Surround Processor
DIGITAL INPUT
CD/D1
Audio lead
Digital lead
Configure each 562V source as required; see Setting up
sources, page 41.
Configure the 568 to a 562 Type option; see the 568 Digital
Surround Processor User Guide for more information.
ANALOGUE INPUT
TV/A1
To connect to Meridian DSP
loudspeakers
DSP5000 – Main R
DIGITAL INPUTS
2 1
Connect one of the COMMS sockets on the 562V, and the
MAIN digital output, to one of the digital speakers using an
M5 lead.
Link the two digital speakers together using an S5 lead as
shown in the illustration.
562V Multimedia Controller
MAIN
DIGITAL
COMMS OUTPUT
DSP5000 – Main L
DIGITAL COMMS
DIGITAL INPUTS
OUTPUT OUTPUT INPUT
2 1
S5 lead
M5 lead
DIGITAL COMMS
OUTPUT OUTPUT INPUT