Dell Inspiron M5040 Owner's Manual page 23

Hide thumbs Also See for Inspiron M5040:
Table of Contents

Advertisement

 
2. Align the notch in the memory module with the tab in the memory-module connector.
 
3. Slide the memory module firmly into the slot at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the
click, remove the memory module and reinstall it.
NOTE:
If the memory module is not installed properly, the computer may not boot.
1
tab
2
notch
 
4. Replace the keyboard. See
 
5. Replace the battery, see
Replacing the
 
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
 
6. Turn on the computer.
As the computer boots, it detects the memory module(s) and automatically updates the system configuration information.
To confirm the amount of memory installed in the computer:
Click Start
® Control Panel® System and Security® System.
Back to Contents Page
 
Replacing the
Keyboard.
Battery, or connect the AC adapter to your computer and an electrical outlet.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspiron 15-n5040Inspiron 15-n5050

Table of Contents