Radio - Kenwood DDX793 Instruction Manual

RADIO

RADIO
(Only for DDX416BT/DDX393/DDX373BT/DDX23BT) (Only for DDX416BT/DDX393/DDX373BT/DDX23BT)
Listening to the radio
❏ Indications and buttons on the source
control screen
1 2
3 4 5
Radio reception information
1 Text information
• Pressing [< ] scrolls the text if not all of the text
is shown.
• Pressing [Radio Text] switches the information
between Radio Text, Radio Text Plus, and PTY
code.
2 The station frequency currently tuned in
3 TI indicator
4 ST/MONO indicator
• The ST indicator lights up when receiving an
FM stereo broadcast with sufficient signal
strength.
5 Seek mode
Operation buttons
[ ] Displays the other operation button
window.
• To hide the window, press [
[AM] Selects the AM band.
30
[FM] Selects the FM band.
[ ] Displays the preset station window.
(Page 31)
• To hide the window, press [
[P1] – [P5]
• Selects a stored station. (Press)
• Stores the current station. (Hold)
Displays the <Equalizer> screen.
[ ]
(Page 52)
[PTY]*
Enters PTY search mode. (Page 31)
[SEEK] Changes the seek mode.
• AUTO1: Auto Search
• AUTO2: Tunes in stations in the
memory one after another.
• MANU: Manual Search
[S] [T] Searches for a station.
• The search method differs
according to the selected seek
mode. (See above.)
[AME ]* Presets stations automatically. (Hold)
(See the right column.)
[MONO]* Activates/deactivates monaural mode
for better FM reception. (Stereo effect
will be lost.)
• The MONO indicator lights up while
monaural mode is activated.
[TI]*
Activates/deactivates TI standby
reception mode. (Page 31)
• To display all available operation buttons, press
[ ] to display the other operation button
window.
].
* Appears only when FM is selected as the source.
Presetting stations
❏ Storing stations in the memory
You can preset 5 stations for each band.
].
Automatic presetting — AME (Auto Memory)
(Hold)
The local stations with the strongest signals are
found and stored automatically.
Manual presetting
1
Tune in to a station you want to preset.
(See the far left column.)
2
Select a preset number.
The station selected in step 1 is stored.
(Hold)