Lumbar Support; Multicontour Backrest - Mercedes-Benz S-Class Operator's Manual

Controls in detail
Seats
The rear power head restraint will fold
upright.
Press switch down in direction of
arrow 1.
The rear power head restraint will fold
backward.
Warning!
For safety reasons, always drive with the
rear head restraints in the upright position
when the rear seats are occupied.
Keep the area around head restraints clear
of articles (e.g. clothing) to not obstruct the
folding operation of the head restraints.
Head restraint tilt
You can adjust the angle manually by pull-
ing or pushing the head restraints by hand.
i
Adjust the head restraint in such a way
that it is as close to the head as possi-
ble.
122

Lumbar support

You can adjust the contour of the seat's
lumbar support to best support your spine.
The thumbwheel for the driver's and front
passenger seat are located on the inner
side of the seat.
G
1 Thumbwheel
Switch on ignition ( page 34).
Set the lumbar support between 0
and 5.

Multicontour backrest*

The multicontour backrest has inflatable
air cushions built into the seat backrest to
provide additional lumbar and side sup-
port.
The seat backrest cushion height and cur-
vature can be continuously varied with
switches on the right side of the seat after
turning the SmartKey in the starter switch
to position 2 or pressing the KEYLESS-GO*
start/stop button ( page 35) twice.