Mercedes-Benz 2011 SLS AMG Operator's Manual page 75

Components of COMAND
COMAND comprises:
the COMAND display
R
the COMAND control unit with DVD
R
changer
the COMAND controller with the Back and
R
Clear button
You can use COMAND to operate the
following main functions:
the navigation system
R
the audio function with the radio, SatRadio,
R
disc (CD audio, DVD audio or MP3 mode),
PCMCIA memory card (MP3 mode), Music
Register and Audio Aux modes
the telephone and the address book
R
function
DVD Video
R
systems settings
R
You can call up the main functions:
using the corresponding function buttons
R
using the main function line in the
R
COMAND display
COMAND Display
i Do not touch the COMAND display. The
display has a very sensitive high-gloss
surface; there is a risk of scratching. Should
the display need cleaning, use a mild
cleaning agent and a soft, antistatic, lint-
free cloth. Commercially available alcohol
and ammonia-free TFT or LCD cleaners are
recommended.
The COMAND display shows the function
currently selected and its associated menus.
The COMAND display is divided into several
areas.
The radio display is shown in the example.
Example: Audio main function display
Status line
1
Main function line
2
Main area
3
Submenu line
4
Status line 1 displays the time and the
current telephone status.
With the main function line 2 you can select
the main function.
Select the function with the COMAND
controller ( Y page 77).
In the example, the audio main function is set
to radio mode and the main area 3 is active.
i The arrangement of the menus can vary,
depending on the equipment. Normally, the
menus for the full equipment version are
shown in this manual.
At a glance
73
Z