Standby Power Led; Model Name Leds; Onboard Led - Asus H170 PRO GAMING User Manual

1.8

Onboard LED

1. Standby Power LED (SB_PWR)
The motherboard comes with a standby power LED that lights up to indicate that the
system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
H170 PRO GAMING Onboard LED
2.

Model Name LEDs

The Model Name LEDs are a group of five small LEDs, located right below the printed
model name. The LEDs light up in the following two modes to highlight the model
name.
H170 PRO GAMING Model Name LED Lighting
Lighting mode
Breathing mode
Still mode
You can turn off the model name LEDs or change the lit modes from the BIOS or the LED
Control app in AI Suite 3. To change the setting in BIOS, go to Advanced > Onboard
Devices Configuration > Model Name LED Lighting item. See section 2.6.7 Onboard
Devices Configuration for details.
1-24
SB_PWR
ON
Standby Power
Model Name LED
Description
The LEDs blink intermittently.
The LEDs become solid red.
OFF
Powered Off
Chapter 1: Product introduction