Plastic Hooks - Mercedes-Benz 2011 E-Class Sedan Operator's Manual

2011 e-class sedan and wagon
Table of Contents

Advertisement

Stowage areas
280
X
Vehicles without memory function: if
necessary, move the driver's or front-
passenger seat forwards.
X
Pull the left-hand or right-hand release
handle at the rear in cargo
compartment : or at the side beside
backrests ;.
The corresponding backrest folds
forwards.
X
Move the driver's or front-passenger seat
back if necessary.
Folding the rear seat backrest back
X
Move the driver's or front-passenger seat
forward if necessary.
!
Make sure that the seat belt does not
become trapped when folding the rear seat
backrest back. Otherwise, it could be
damaged.
X
Fold seat backrest : back until it engages.
G
Risk of injury
Make sure that the rear seat backrest is
correctly engaged. Otherwise, vehicle
occupants could be injured by objects being
thrown around if you
brake sharply
R
change direction suddenly
R
are involved in an accident
R
If the rear seat backrest is not engaged, this
will be shown in the multifunction display in
the instrument cluster.
X
Adjust the head restraints if necessary
(
Y
page 105).
X
Move the driver's or front-passenger seat
back if necessary.
Securing cargos
Coat hooks (Sedan)
On vehicles without a through-loading feature
in the rear bench seat, six plastic hooks are
installed to the trunk floor.
Lashing eyelets
Observe the following notes on securing
loads:
secure the load using the cargo tie down
R
rings.
do not use elastic straps or nets to secure
R
a load, as these are only intended as an
anti-slip protection for light loads.

Advertisement

Table of Contents
loading

Table of Contents