Table of Contents
Advertisement
4
Using the Notebook PC
Optical Drive
Inserting an optical disc
1. While the Notebook PC's power is ON,
press the drive's eject button and the tray
will eject out partially.
3. Hold the disc by the edge and face the disc's
printed side up. Push down on both sides of
the disc's center until the disc snaps onto
the hub. The hub should be higher than
the disc when correctly mounted.
NOTE: It is normal to hear as well as feel the CD spinning with great intensity in the
CD drive while data is read.
42
1
2. Gently pull on the drive's front panel and slide
4
4. Slowly push the drive's tray back in. The drive
the tray completely out. Be careful not to touch
the CD drive lens and other mechanisms.
Make sure there are no obstructions that may
get jammed under the drive's tray.
will begin reading the table of contents (TOC)
on the disc. When the drive stops, the disc is
ready to be used.
3
2
5
Advertisement
Table of Contents
