Settings; Vehicle Status Message Memory; Menu; Individual Settings - Mercedes-Benz 2009 SLK-Class Operator's Manual

Controls in detail
Control system

Vehicle status message memory

menu

Use the Vehicle status message memory
menu to scan malfunction and warning mes-
sages that may be stored in the memory.
Such messages appear in the multifunction
display and are based on conditions or sys-
tem status the vehicle's system has recorded.
The Vehicle status message memory menu
only appears, if messages have been stored.
G Warning!
Malfunction and warning messages are
only indicated for certain systems and are
intentionally not very detailed. The mal-
function and warning messages are simply
a reminder with respect to the operation of
certain systems. They do not replace the
owner's and/or driver's responsibility to
maintain the vehicle's operating safety.
Have all required maintenance and safety
checks performed on the vehicle. Bring the
vehicle to an authorized Mercedes-Benz
Center to address the malfunction and
warning messages.
118
X
Press button or repeatedly until
è ÿ
the Vehicle status message memory
menu appears in the multifunction display.
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction dis-
play:
Number of recorded status messages
1
X
Press button or k.
j
The stored messages will now be displayed
in the order in which they have occurred.
For malfunction and warning messages,
see "Vehicle status messages in the multi-
function display" ( Y page 271).
Should the vehicle's system record any con-
ditions while driving, the number of messages
will reappear in the multifunction display
when the SmartKey in the starter switch is
turned to position 0 or removed fromthe
starter switch.
Except for high-priority messages, the vehicle
status message memory will be cleared when
you turn off the ignition.
Settings menu
Introduction
In the Settings menu there are two func-
tions: The function To reset, push reset
button for 3 seconds, with which you can
reset all the settings to the original factory
settings and a collection of submenus with
which you can make individual settings for
your vehicle.
The following settings and submenus are
available in the Settings menu:
Resetting to factory settings (
R
Submenus in the Settings menu
R
( Y page 119)
Instrument cluster submenu (
R
Time/Date submenu ( Y page 121)
R
Lighting submenu ( Y page 122)
R
Vehicle submenu ( Y page 124)
R
Convenience submenu ( Y page 124)
R
Y page 119)
Y page 120)