Smartkey With Keyless-Go; Display - Mercedes-Benz 2009 S-Class Operator's Manual

Display messages
Shift to P
Key
Not Detected
Key
Not Detected
Key
Not Detected
Vehicle status messages in the multifunction display
Possible cause/consequence
You have attempted to turn off the engine
with the KEYLESS-GO start/stop button
and opened the driver's door with the
automatic transmission not shift to park
position P.
The SmartKey with KEYLESS-GO is not
detected while the engine is running
because the SmartKey is not in the
vehicle.
The SmartKey with KEYLESS-GO is not
detected while the engine is running
because there is strong radio-frequency
interference.
The SmartKey with KEYLESS-GO is
momentarily not detected.
Possible solution
X
Shift the automatic transmission to park
position P ( Y page 345).
or
X
Close the driver's door.
X
Stop the vehicle as soon as it is safe to do so.
X
Engage the electronic parking brake.
X
Search for the SmartKey.
Otherwise the vehicle cannot be locked
centrally nor can the engine be started again
after the engine is stopped.
X
Stop the vehicle as soon as it is safe to do so.
X
Engage the electronic parking brake.
X
Remove KEYLESS-GO button from the starter
switch ( Y page 308).
X
Operate the vehicle with the SmartKey in the
starter switch.
X
Change the position of the SmartKey in the
vehicle.
X
If necessary, remove KEYLESS-GO button from
the starter switch ( Y page 308).
X
Operate the vehicle with the SmartKey in the
starter switch.
Practical hints
Z
531