Height Adjustment - Mercedes-Benz 2009 GL320 BlueTEC Operator's Manual

Seat belt outlet
1
Latch plate
2
Buckle
3
Seat belt release button
4
X
With a smooth motion, pull the seat belt out
of seat belt outlet 1.
X
Place the shoulder portion of the seat belt
across the top of your shoulder and the lap
portion across your hips.
X
Push latch plate into buckle
2
clicks.
X
If necessary, adjust the seat belt to the
correct height.
X
If necessary, tighten the lap portion to a
snug fit by pulling shoulder portion up.
Seat belt outlet height adjustment
Seat belt height adjuster
1
Release button
2
X
Raising: Slide seat belt height adjuster
upward.
1
Seat belt height adjuster
1
different positions.
X
until it Lowering: Press and hold release button
3
2.
X
Slide seat belt height adjuster
downward.
X
Release button
height adjuster
Releasing the seat belts
X
Press seat belt release button
( Y page 63).
Allow the retractor to completely rewind
the seat belt by guiding the latch plate
( Y page 63).
! Make sure the seat belt retracts fully so
that the seat belt and/or latch plate cannot
get caught or pinched in the door or in the
seat mechanism. This can damage the seat
belt and impair its effectiveness, and/or
cause damage to the door and/or door trim
panel. Such damage is not covered by the
Mercedes-Benz Limited Warranty.
Damaged seat belts must be replaced.
Contact an authorized Mercedes-Benz
engages in
Center.
Safety and security
Occupant safety
1
and make sure seat belt
2
engages into place.
1
4
2
63
Z