Table of Contents
Advertisement
4
Using the Notebook PC
Inserting a PC Card (PCMCIA)
1
1. If there is a PC Card socket protector, remove
it using the "Removing a PC Card" instructions
below.
2. Insert the PC card with the connector side first
and label side up. Standard PC cards will be
flush with the Notebook PC when fully inserted.
Removing a PC Card (PCMCIA)
To remove the PC card, first remove all cables or adapters attached to the PC card, then double-click the
PC card icon on the Windows taskbar and stop the PC card you want to remove.
1. Press in the toggle eject button and release.
The recessed spring loaded toggle button
will extend when pushed in and released.
3
44
Be sure the PC card is
level when inserting.
4
2
3. Carefully connect any cables or adapters
needed by the PC card. Usually connectors can
only be inserted in one orientation. Look for a
sticker, icon, or marking on one side of the con-
nector representing the top side.
2. Press the extended button again to eject the
PC Card. Carefully pull the ejected PC card
out of the socket.
5
Advertisement
Table of Contents
