Tpms - Mercedes-Benz 2009 E-Class Operator's Manual

Practical hints
Vehicle status messages in the multifunction display
Display messages
Tire Pressure Check tires
Tire pressure is only displayed
after driving for a
few minutes.
Tire Pressure Inoperative
Monitor
Tire Pressure Inoperative
Monitor No Wheel Sensors
308
Possible cause/consequence
The Run Flat Indicator indicates that the
pressure is too low in one or more tires.
Vehicles with Advanced TPMS (Canada
only): The tire inflation pressure is being
checked.
The TPMS (USA only) or Advanced TPMS
(Canada only) is malfunctioning.
There are wheels without appropriate
wheel sensors mounted (e.g. winter tires).
Possible solution
X
Carefully bring the vehicle to a halt, avoiding
abrupt steering and braking maneuvers.
Observe the traffic situation around you.
X
Check the tires and, if necessary, change the
wheel ( Y page 355).
X
Check and adjust tire inflation pressure as
required ( Y page 255).
X
Restart the Run Flat Indicator after adjusting
the tire inflation pressure values
( Y page 256).
X
Drive the vehicle for a few minutes.
X
Have the TPMS or Advanced TPMS checked at
an authorized Mercedes-Benz Center.
X
Have the TPMS or Advanced TPMS checked at
an authorized Mercedes-Benz Center.
X
Have the appropriate wheel sensors installed
at an authorized Mercedes-Benz Center.