Picture Options; Color Tone; Hdmi Black Level; Dynamic Backlight - Samsung UD46E-A User Manual

Picture Options

MENU m → Picture → Picture Options
Picture Mode Picture Mode
settings
Shop & Mall, Office & School, Video/Image
Terminal & Station, Video Wall
Text
Calibration

Color Tone

Picture Mode is set to Text.
If
Off Cool Standard Warm
• / / /
Picture Mode is set to Video/Image.
If
Off Cool Standard Warm1 Warm2
/ / / /
•
― If
Picture Mode is set to Calibration, Color Tone
― Settings can be adjusted and stored for each external device connected to an input on the product.

HDMI Black Level

Selects the black level on the screen to adjust the screen depth.
Low / Normal
•
― This option is not available if the input source is set to PC.
→ ENTER E
Adjustable options
Color Tone HDMI Black Level
/

Dynamic Backlight

UHD COLOR

/
Color Tone HDMI Black Level
/
Dynamic Backlight UHD COLOR
/
Dynamic Backlight / UHD COLOR
is disabled.
Dynamic Backlight
Automatically adjust the backlight to provide the best possible screen contrast under the current
conditions.
Off / On
•
― The
Dynamic Backlight
UHD COLOR
/
HDMI1 Off On
• : /
HDMI2 Off On
• : /
/
DisplayPort Off
• :
― To enable a UHD input source, set
― If monitors are connected through Loopout when a UHD resolution is in use, set
on all monitors.
― A maximum of 25 monitors can be connected through Loopout when using UHD resolution.
― To use
UHD COLOR mode over an HDMI cable, using an HDMI cable that is compatible with HDMI 2.0
is recommended. Make sure that the cable is shorter than 2m.
― Switching
UHD COLOR
― If the HDMI/DP connector with
UHD content, the device may not operate properly. Connect a device that supports UHD content.
is not available when the input source is set to
On
/
UHD COLOR to On.
between On and Off takes some time.
UHD COLOR enabled is connected to a device that does not support
PC while Video Wall is On.
UHD COLOR to On
60