Mercedes-Benz 2006 SLK 280 Operator's Manual page 134

Warning!
Malfunction and warning messages are only
indicated for certain systems and are inten-
tionally not very detailed. The malfunction
and warning messages are simply a remind-
er with respect to the operation of certain
systems and do not replace the owner's
and/or driver's responsibility to maintain
the vehicle's operating safety by having all
required maintenance and safety checks
performed on the vehicle and by bringing
the vehicle to an authorized Mercedes-Benz
Center to address the malfunction and
warning messages ( page 368).
Press button è or ÿ repeatedly
until the vehicle status message mem-
ory appears in the multifunction dis-
play.
If the vehicle status message memory
menu does not appear, then there are
no messages stored.
Vehicle status messages have been
G
recorded
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction dis-
play:
1 Number of messages
Press button j or k.
The stored messages will now be dis-
played in the order in which they have
occurred. For malfunction and warning
messages, see "Vehicle status messag-
es in the multifunction display"
( page 368).
Controls in detail
Control system
Should the vehicle's system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display when the SmartKey in the
starter switch is turned to position 0 or re-
moved from the starter switch:
Press button Jrepeatedly until you
have seen all occurred messages.
i
The vehicle status message memory
will be cleared when you turn the
SmartKey in the starter switch to
position 1 or 2.
You will then only see high-priority
messages in the multifunction display
( page 368).
133