Controls in detail
Seats
Head restraint height (rear outer seats)
1 Release button
Raising
Manually adjust the height of the head
restraint by pulling it upward.
If the head restraint is fully retracted,
push release button 1 and pull the
head restraint out.
Lowering
To lower the head restraint, push
release button 1 and push down on
the head restraint.
110
i
Adjust the head restraint in such a way
that it is as close to the head as
possible.
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are
intended to help reduce injuries during an
accident.
Folding head restraints back with
release button
The rear seat head restraints can be folded
backward for increased visibility.
G
1 Release button
Push release button 1.
The head restraint will fold backward.
i
You can also fold the rear outer seat
head restraints back using the switch
in the center console ( page 111).