Adjusting The Feet; Destroying Packaging Material; Connecting To The Drain - Blomberg DHP 24400W Owner's Manual & Installation Instructions

3.6 Adjusting the feet

• In order to ensure that the dryer operates more
silently and vibration-free, it must stand level and
balanced on its feet. Balance the machine by
adjusting the feet.
• Turn the feet to left or right until the dryer stands
level and firmly.
C
Never unscrew the adjustable feet from
their housings.

3.7 Destroying packaging material

Packaging material can be dangerous to children. Keep
the packaging materials out of the reach of children or
dispose of them accordingly. Do not dispose of them
together with normal domestic waste.
Packaging materials of your appliance are manufactured
from recyclable materials.

3.8 Connecting to the drain

In products equipped with condenser unit, water
accumulates in the water tank during the drying cycle.
You should drain accumulated water after each drying
cycle.
Connecting the water drain hose
1-2 Connect one end of the drain hose supplied with
the dryer to the connection point from where you
removed the hose of the product in previous step.
3
Connect the other end of the drain hose directly to
the wastewater drain or to the washbasin.
Dryer / User Manual
1
3
A
Hose connection should be made in a
safe manner. Your drain house will be
flooded if the hose comes out of its
housing during water discharge.
C
Water drain hose should be attached to a
height of maximum 80 cm.
C
Make sure that the water drain hose
is not stepped on and it is not folded
between the drain and the machine.
1 2
13 / 28 EN