Yale AC-100W Instruction Manual

Indoor dome camera with IR

night vision

Camera lens
LED for night vision
Angle adjustment
The AC-100W is a colour CMOS Camera
that can be operated in almost all lighting
conditions, from bright daylight (provided the
camera is not directly pointed at the sun) to
complete darkness
In complete or near-total darkness the AC-
100W uses built in infrared LED's to illuminate
the area covered up to a total 20 meters away.
The Infrared light is invisible to the human eye,
although you may notice a faint red glow which
is normal.
The AC-100W is extremely sensitive to
lighting conditions. You can make the most of
majority of light conditions. Colour image in the
day and Black & White in low light conditions.
Display extreme caution when using ladders or
steps. Please follow manufactures instructions.
Be careful when using hand & power tools
and follow the manufactures guidelines when
using them. Take care that the correct tools
are used. Wear goggles or protective clothing
where required.
In the event you feel unsure about the
installation please consult your local qualified
electrician.
Easy Fit CCTV System
(AC-100W)
Video
Description
• Colour camera lens. Automatically switch to
Black & White mode in the dark.
• Infra-red LED for night vision
• Use supplied hex key to adjust camera angle
• Video output (BNC male connector)
• Power input (12V 500mA)
Pack contents
• 1 x Indoor dome Camera.
• 1 x Screw pack
• 1 x 15m BNC/DC extension cable
• 1 x 12V 500mA Power adaptor
Information and illustrations are subject to
change within this document.
Yale reserves the right to alter the specification
and product design at anytime without notice.
Yale is a registered trademark.
2014 ASSA ABLOY. All rights reserved
Power