Table of Contents
Advertisement
Controls in detail
Useful features
If the indicator lamp in the Roadside
Assistance button • is illuminated
continuously and there was no voice
connection to the Response Center es-
tablished, then the Tele Aid system
could not initiate a Roadside Assis-
tance call (e.g. the relevant cellular
phone network is not available). The
message
Roadside Assistance –
appears in the multifunc-
Call failed
tion display.
Roadside Assistance calls can be ter-
minated using the ì button on the
multifunction steering wheel.
232
Information button ¡
Located below the center armrest cover is
the Information button ¡ .
Press and hold the button (for longer
than 2 seconds).
A call to the Customer Assistance Cen-
ter will be initiated. The button will
flash while the call is in progress. The
message
Info – Connecting call
appear in the multifunction display.
When the connection is established, the
message
Info – Call connected
in the multifunction display. The Tele Aid
system will transmit data generating the
vehicle identification number, model, color
and location (subject to availability of cel-
lular and GPS signals).
A voice connection between the Customer
Assistance Center representative and the
occupants of the vehicle will be estab-
lished. When a voice connection is estab-
lished the audio system mutes and the
message
Tele Aid – Info call active
appears in the multifunction display. Infor-
mation regarding the operation of your ve-
hicle, the nearest Mercedes-Benz Center
or Mercedes-Benz USA products and ser-
vices is available to you.
For more details concerning the Tele Aid
system, please visit www.mbusa.com and
use your ID and password (sent to you sep-
arately) to learn more (USA only).
i
will
The indicator lamp in the Information
button ¡ remains illuminated in red
for approx. 10 seconds during the sys-
appears
tem self-check after turning key in the
starter switch to position 2 (together
with the SOS button and the Roadside
Assistance button • ).
See System self-check ( page 228)
when the indicator lamp does not light
up in red or stays on longer than ap-
proximately 10 seconds.
If the indicator lamp in the Information
button ¡ is illuminated continuous-
ly and there was no voice connection to
Advertisement
Table of Contents
