PAC uPAC-HY2 Instructions

Must Do --- Important Installation Steps BEFORE
t~e
iPod / AUX Interface is Connected
. .
• Ignition key MUST be
OFF and OUT
with the driver's door open.
• Plug harness into radio and into the vehicle harness.
• Set dip switches to all
OFF
unless noted
in
the instructions. Plug
in
the blue interface box.
• WAIT for 1 full minute before turning on ignition key.
• WAIT for 1 full minute to allow the interface to initialize.
• Follow instructions and "quick reference" cards included
in
the
package for operation instructions.
Pacific Accessory. Corporation www.pac-audio.com