Malfunction And Warning Messages In The Multifunction Display - Mercedes-Benz 2000 CLK 320 Operator's Manual

Instruments
Operation
and controls
Malfunction and warning messages
Malfunction and warning messages in the
multifunction display
Malfunction and warning messages for the following
systems will be displayed immediately in the
multifunction display.
They are divided into three categories
Category C1:
Messages of most immediate priority.
These cannot be clerared from the instrument cluster
J
using the button.
Categories C2 and C3:
Messages of less immediate priority.
These messages can be cleared from the instrument
using the J button and
malfunction message memory. See page 102.
Instrument
Driving
cluster display
are then stored in the
Practical hints Car care
Notes:
Certain malfunction and warning messages are
accompanied by an audible signal.
Malfunction and warning messages in red are always
accompanied by an audible signal.
Temporary messages such as "SWITCH OFF LIGHTS"
will not be stored in the malfunction message memory.
Warning!
All messages contain important information which
should be taken note of and, where malfunction
indicated, addressed as soon as possible at an
authorized Mercedes-Benz Center.
Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz Limited
Warranty, or result in property damage or personal
injury.
Technical
Index
data
222