Before Requesting Service - Memorex MVP0028 Owner's Manual

Dc power video cassette player
Hide thumbs Also See for MVP0028:
Table of Contents

Advertisement

BEFORE REQUESTING SERVICE

Check the following chart for the symptom(s) you are experiencing.
SYMPTOMS
POWER
No power
Power is on-no
operations
PLAYBACK
No picture when playing
back a recorded tape.
Noise bars on the screen.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE
AT WWW.MEMCORPINC.COM OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED
TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INT'L AT 1-800-321-6993.
4C61501A E/P16-19
CAUSES
The DC car cord is not
plugged into the cigarette
lighter socket.
The DC car cord fuse is
blown.
Cassette is not inserted.
Moisture condenses on the
video heads.
The TV is not set to the Video
channel 3 or 4.
Tracking adjustment
beyond range of automatic
tracking circuit.
Video heads are dirty.
The tape is worn or damaged.
17
POSSIBLE SOLUTIONS
Connect the DC car cord to
the cigarette lighter socket.
Replace the fuse.
Insert cassette.
The PLAY indicator is
flashing on and off. Wait two
or three hours until it goes off.
Set the Video channel to 3 or
4 position on your TV. (When
a TV is connected with an an-
tenna cable)
Adjust tracking manually
using the TRACKING L and
M buttons on remote control.
Clean the video heads.
Try another tape.
9/13/01, 2:19 PM
PAGE
11
11
13
5
12
15
18
17

Advertisement

Table of Contents
loading

Table of Contents