Yamaha MusicCast MCX-C15 Owner's Manual page 58

Problem
None of the The client is locked from the
controls other server.
than the volume
control have
any effect on
the client.
Starting The client and the radio are too
playback on the close to each other.
client produces
interference
noise on nearby
radios.
There is a This is normal when listening
significant with the client.
pause between
playback of
songs on the
client.
You cannot The ANALOG REC LEVEL
access a preset on the front panel of the server
radio station on is set too low.
a YAMAHA AV
receiver
The parameters for the AV
connected to
receiver connected to the
your
server are incorrect.
MusicCAST
system.
The AV receiver connected to
the server is not turned on.
The AV receiver is not
correctly connected to the
server.
The AV receiver is not
receiving a strong radio signal.
Playback cuts Another MusicCAST
off or switches component is changing the
to another input tuner preset or external input
when listening on the server.
to a tuner
preset on the
client.
Cause
Use the server to remove the lock.
Place the client and the radio at
least one meter apart.
Increase the ANALOG REC
LEVEL.
Configure the AV receiver
parameters correctly.
Turn the AV receiver on.
Correctly connect the AV receiver
to the server.
Refer to the owner's manual of
your AV receiver.
Stop the other MusicCAST
component from changing input
sources.
TROUBLESHOOTING
Remedy
MCX-1000
MCX-1000
MCX-1000
MCX-1000
Refer to
page
Owner's
Manual,
page 94
—
—
Owner's
Manual,
page 29
Owner's
Manual,
page 122
—
Owner's
Manual,
page 13
—
—
57