Table of Contents
Advertisement
SLEEP TIMER
The sleep timer is a countdown timer for switching the system to standby mode after a specified time.
It enables you to listen to the radio, a CD or a cassette prior to falling asleep. The sleep timer can be set
from 120 to 15 minutes.
Switch on the system by pressing the STANDBY (power) button, either on the system or on the remote
control.
–
The STANDBY indicator disappears.
Select the sound source by pressing TAPE, TUNER / BAND, AUX or CD.
Press the SLEEP button to set the sleep time.
–
The word SLEEP and the number 120 will appear on the display.
–
The system will now play for 120 minutes.
To decrease the sleep time in steps of 15 minutes. Press SLEEP button to number 15 will appear on
the display.
–
After a few seconds, the previous display is shown again.
To switch off the system before the SLEEP time has elapsed, press STANDBY (power), either on the
system or on the remote control.
SPECIFICATION
POWER SOURCE
AC:
RADIO FREQUENCY COVERAGE
FM:
AM:
RECORDING SYSTEM
Recording System
Erasing System
GENERAL
Speaker
Power Output
Headphones:
CD PLAYER
Pick Up:
Encoding:
Memorex.p65
120V~60Hz
87.5 – 108 MHz
520 – 1720 kHz
AC Bias
Magnetic Erase
4 Ohms
10 Watt at 10% T.H.D. per channel
3.5MM stereo jack plug, 8 – 32
3-Beam, semiconductor laser
1-Bit linear 8 x oversampling
E-12
12
11/8/01, 11:11 AM
Advertisement
Table of Contents
