Memorex MKS5012 Operating Instructions Manual page 14

MKS5012.O/M.QXD 7/15/02
DUBBING A CASSETTE TAPE AT NORMAL OR HIGH SPEED
1
Insert a prerecorded tape into Deck 2 and a blank cassette tape into
Deck 1. For high speed dubbing, slide the SPEED DUBBING switch to
the HIGH position.
3
2
Press the PAUSE ( ) button
then the RECORD (
on Deck 1; the PLAY (❿) button
will automatically depress.
NOTES:
• When dubbing at high speed, a chattering sound may be heard. To avoid this, set the MASTER
VOLUME control to the minimum position while the tape is dubbing at high speed. DO NOT slide the
SPEED DUBBING switch while dubbing is in progress.
• For best results, use normal bias cassette tapes when recording.
7:00 AM Page 13
OPERATION (CONTINUED)
4
1
Press the PLAY (
Deck 1 will release automatically and the dubbing will begin.
) button
dubbing, the shorter tape will stop first and the other will continue
running until it reaches the end or is stopped manually.
2
For higher quality dubbing, slide
the SPEED DUBBING switch to
the NORMAL position.
2
1
❿ ) button on Deck 2 and the PAUSE ( ) button
13
on
When