To Listen To The Radio; Radio Operation - Memorex MPD8860 User Manual

TO LISTEN TO THE RADIO

1
Set the VOLUME control 1 to minimum
and plug the headphones into the
PHONES jack. Press the PLAY/PAUSE
(®p)/POWER ON button 2 to turn the
unit on.
3
Press and release the Skip/TUNING o
1 or n 2 button to tune a station. Press
and hold the Skip/TUNING o 1 or n 2
button for rapid search tuning.
5
To turn the radio off, press the STOP
( )/POWER OFF button.

RADIO OPERATION

2
1
2
1
2
2
1 1
Slide the FUNCTION switch 1 to the RADIO
position. Press the MENU/ESP/BAND
button 2 to select a band (AM or FM). If
listening to FM, press the MODE/√ button
3 to select Stereo or Mono.
4
Adjust the VOLUME control 1 and DBBS
switch 2 as desired. If FM STEREO
reception is weak/noisy, press the
MODE/√
case the reception will be monaural.
ANTENNAS
AM–This unit has a built-in ferrite bar
antenna, which provides adequate reception
in most areas. If reception is weak, turn the
unit to improve reception.
FM–The headphones act as an antenna for
FM. Extend the headphone wire for best FM
reception.
AUTO SCAN
Press and hold the Skip/TUNING
button for approximately 1 second and the
unit will automatically search for the next
available station.
7
3
2
3
button 3 to select Mono, in this
1
2
or
o n