ENGLISH 1. Important notes 1.4 Protecting the environment • When you have unpacked the unit, do not simply throw the packaging into the house- Please observe the following points before hold waste. putting the unit into operation: • Take the various items of packaging to the The sweeping machine is not suitable for appropriate collecting points for recycling.
ENGLISH 3. Unpacking and - Undo nut on side brush shaft and remove washer. assembling - Connect the carrier plate and side brush Note: For packing reasons, the sweeping to the brush axle and screw into position machine is only partly assembled. with the plain washer and nut.
ENGLISH Adjusting the side brush Raising the foot pedal lowers the side brush. By turning the knob, set the side brush so that approximately 1/3 of the brush circumference comes into contact with the ground. When sweeping very rough floors the side brush disengages automatically so as to protect the drive.
ENGLISH 5. Care and maintenance • Side brush for wear. Clean the machine after each use. Remove foreign bodies, particularly fibers, string, etc. Note: The side brush must be replaced from the brushes and drive parts. when less than 1/3 of the brush circumference makes contact with the Take the fabric filter out of the housing, wash ground when the brush is in its lowest...